www.megadrum.info

Does anybody have the schematics for the inputs for the 56 input version of MegaDrum? I must do a rewiring because i couldn't find any stacked jacks . Cheers and thanks in advance!

First of all, there is no such thing as MegaDrum v3.1
If you're talking about Synthex's PCB v3.1, then the schematic for this PCB is in viewtopic.php?f=3&t=813

Ok, my bad. But in the thread that you pointed me is the schematic from the 74HC4851 ICs to 40 and 26 input connectors. I need the schematic for the input boards (from the input jacks to the 40 and 26 input connectors). Like viewtopic.php?f=3&t=835.

There are no ICs on the Synthex's input board. Seems like you're mixing up the input board for the Synthex's PCB and an analogue board.

All is in the Quick Manual.pdf

Synthex wrote:All is in the Quick Manual.pdf

Thank you. I forgot about the manual...